How to pair IPC repeater

FAQ

Note: IPC repeater should only be used when you need to increase the signal of weak signal camera.
Note: Each IPC repeater can pair up to 2 cameras.

How to pair IPC repeater

  1. Power on both NVR system and the IPC router and connect the 2 device together using the Ethernet cable.
  2. Once the 2 device are powered on and connected go to ‘Video Manage’ and click ‘Refresh’.
  3. When the IPC repeater is shown on the top chart, please double click to open the IPC repeater menu.
  4. Within the IPC repeater menu click ‘Match’ to pair the IPC repeater into the system.
  5. Click ‘OK’ to save and exit back to ‘Video Manage’.
  6. With the Ethernet cable still connected, go to ‘Repeater’ within the video manage and pair the camera into the repeater.
  7. Once you are done click ‘Apply’ and ‘OK’ to save and exit.
  8. Now you can unplug the Ethernet cable from the repeater and relocate the camera and the repeater.
The paired IPC repeater should be placed between the NVR system and the camera it has been paired to.