How to sync camera with Ethernet port

FAQ

For camera model CVT3010W Gen.1 Only.
If there is no available space for the camera, please make sure to delete the camera from the bottom chart before adding a new camera.

How to sync camera with Ethernet port

  1. Power on the NVR system & the camera and connect the camera directly to the NVR system using the Ethernet cable.
  2. From the NVR system go to ‘Video manage’ and click ‘Refresh’ to search for the connect-ed camera. Once the refresh is done you should be able to see ‘IP cam’ on the top chart.
  3. Click ‘Match code’ and wait while the system automatically searches & add the camera to the system.
  4. When the camera has been sync to the system click ‘Exit’ to close the ‘match code’.
  5. When Match code is finished, the camera should move to the bottom chart with IP address starting with 172.
  6. Now unplug the Ethernet cable to check the camera is working wirelessly and click ‘OK’ to save & exit ‘Video manage’.