How to sync camera with pairing button

FAQ

For camera model CVT20WB, CVT21WB, CVT23WB
If there is no available space for the camera, please make sure to delete the camera from the bottom chart before adding a new camera.
If you have an issue syncing the camera to the system, please press & hold the ‘Sync’button for 10 seconds to reset and try again. The reset process may take up to 1~2 min.

How to sync camera with pairing button

  1. Power on the system and the camera near the system.
  2. From the system go to ‘Video manage’ and click ‘WiFi Add’.
  3. Once you see the WiFi add screen display, press & hold the ‘Sync’ button for 5 seconds to enter the wireless sync mode.
  4. Please allow 30~60 second for the system to search and add the camera to the system.
  5. When the system is done adding the camera, click on the ‘Exit’ to stop the pairing process.
  6. When WiFi add is finished, the camera should move to the bottom chart with IP address starting with 172.
  7. Click ‘OK’ to save & exit the system and you are done.