How to view system using the external monitor/TV

FAQ

The HDMI port is on the back panel of the NVR.
HDMI cable is required (not included in the package).

Please follow the instruction below

  1. Please connect the monitor or TV using the HDMI cable to the back of the NVR system.
  2. Connect HDMI Cable to the NVR System
    Connect HDMI Cable to the NVR System
    Connect HDMI Cable to the Monitor/TV
    Connect HDMI Cable to the Monitor/TV
  3. Once you have connected the HDMI cable from the NVR system go to: System Setup > General Setup > Screen Setup.
  4. External Screen Setup
    External Screen Setup
  5. From the Screen setup change the ‘VGA Resolution’ to the resolution supported by your monitor / TV (Select ‘1080@60’ for Full HD monitor / TV) and click ‘Apply’ to save the setting.

How to guides / How to view system using the external monitor/TV